Category Archives: Uncategorized

The BDT Technique

We are very proud to announce the launch of the BDT (burn Out Denture Tooth Technique) Technique Here in the USA!! Here is a link to the article explaining everything 260E1428260E1381utah ideas.002The_BTD_Technique_flames_2BDT Technique article PDF


Pekkton Case Study Case 1

Click on Link for the clinical case study.

utah ideas.002

pekkton case study copy


Phil & Lee Lecturing in Utah USA.


2013 a year in pictures…. Click Video Link Below!

image 1.020http://youtu.be/NiOr5sk7_L4


Latest case. more images to follow.

pre op situation

pre op situation

Finished e.Plant bridge

Finished e.Plant bridge

Bridge in situ

Bridge in situ


Bio-HPP and e.Plant implant bridges

This Video will work on Smartphones.


Immediate Loading Utilising Straumann GonyX

Today BDT Technician Lee Mullins manufactured a immediate screw retained denture utilising the Straumann gonyX guided surgery system.
below are 2 images showing the Guided surgery Stent and the finished temp denture. For the full rundown on how this was achieved follow the link below the photographs to the Tech Talk page.

GonyX Guided surgery Stent

Screw Retained Temporary Denture


World Exclusive! 1st e.Plant Bridge fitted!!

Today we are proud to say we have fitted the worlds 1st e.Plant implant bridge.
here is a sneak preview of the bridge prior to fit and one with the bridge fitted
The full story will be revealed in our next post!

e.Plant bridge prior to fit.


e.Plant screw retained bridge fitted

e.Plant screw retained bridge fitted.


BDT Surgery Now Open!

The BDT Surgery


We used our Dental Surgery for the 1st time today for a rescue case. The case was started by another lab with a clinician we do not work with, and after several attempts to get things right and failing every time the patient lost patience and was referred to a clinician we work with on a regular basis.

After a hectic morning session we had isolated various problem implants and began to prepare 2
immediate prothesis’s for the implants that were still sound.
By lunch time we had 2 implant retained dentures ready to fit this went well and after fine tuning the occlusion we were then able to optimise the dentures.
The dentures had the teeth shapes and characters altered and the flanges and palate removed converting them into screw retained temporary restorations.
While this was going on the clinician provided us with new upper and lower fixture head impressions so we could begin work on the screw retained bite blocks and other diagnostic stages before commencing with the production of the definitive restorations.

After final checks the screw retained temporary bridges were polished and fitted.
The patient was overcome with joy after 2 years of been messed around by unprofessional Clinicians and Technicians he could not believe what we had achieved in a single day.

All in all a great result and excellent team work by Lee, Phil, Paul, and the clinical team and of course the patient who had to take another leap of faith by coming to the surgery and agreeing to let us take control of the treatment planning.

We could not of wished for a better way to open the BDT Surgery. :O)


The Importance of good quality control

Here at Beever Dental we believe that consistently great results can only be achieved by adhering to strict protocols, keeping up to date with the latest technological advances, communicating and sharing ideas with fellow professionals and listening to our patients needs as well as our clinicians.

In order to ensure we are performing these duties to the best of our abilities we have a number of quality control stages as part of our everyday working procedures. Every single restoration goes through a final stage inspection by technicians with over 20 years experience in dental technology.

We hope that these measures stop any restorations we are not happy with leaving the lab.

Sometimes we see work from other laboratories that has obviously not gone through the same quality control protocols we use in the lab.
The latest example of this happened today.
We received a call from a client who has not previously used the lab for Dentures, the call basically went like this. “Hi Phill my denture lab is not performing well at the moment, the latest case I have sent them has just been delivered to the surgery and its very poor”. “I personally called the lab about this case last week and asked them to do a nice job as the patient is very discerning and the last few cases have been not to your usual standard”.
Our client was told they would keep an eye out for the case arriving and do a “top job”.
When the denture set up arrived at the lab we were to be frank pretty shocked. We know that sometimes cases can be very hard to get right and sometimes function has an effect on aesthetics however in this case there was no excuse, it was simply a poorly made prosthesis.

In this series of images you can see the denture set up made by a local competitor lab and the denture set up made by us.

Poor Diagnostic set up from a competitor lab


Lateral view illustrating the poor occlusal scheme


New Diagnostic set up by BDT Technician Lee Mullins


Lateral view showing a good occlusal scheme.


As you can see from the images everything about this case was wrong and should have never left the lab.
The teeth used are very basic 2 layered entry level teeth.
The teeth used are also too small.
The teeth are covered in wax.
The wax carving around the teeth is very basic.
The occlusal scheme is completely wrong.

Im sure you would agree this is not a quality PRIVATE standard set up.

The BDT Technician Lee Mullins was responsible for rescuing this case.

As always all comments greatly appreciated.